What is the correct way to use hot melt adhesive?

Hot melt adhesive is a kind of glue widely used in home and industry. It is usually applied to a hot dissolve glue stick with molten glue, and then formed by hot dissolution and cooling to form a solid bond. However, while hot melt adhesives may seem simple, there are many tips and points to master in the proper use of hot melt adhesives, which I will cover in detail below.

First, choose the right hot melt glue gun

Different hot melt glue guns are suitable for different types and sizes of glue sticks. You need to make sure that the hot glue gun you choose can accommodate the size of glue stick you are using and has the right heating power. Otherwise, you may not be able to do your job or choose the wrong tool.

Second, choose the right glue stick and glue type

The type and quality of hot melt sticks and glues affect their bonding ability and durability. Therefore, you need to choose the right type of strip and glue for your work needs, especially before handling sensitive materials, you need to make sure that they can stick well. Some glue sticks and glues are suitable for specific uses and materials, such as metal, wood, glass, plastic, etc. You need to determine the material type and choose the right glue and strip.

Third, prepare your tools and work area

Before using hot melt glue, you need to prepare various tools and utensils, such as buttons, bottle caps, wooden toys, etc. You also need to prepare the work area, which means you have to keep the space around you clean and tidy to avoid contamination. You'll also need warm water and a clean cloth to clean and care for your hot glue gun and other tools.

Fourth, put the glue stick into the hot melt glue gun

The process of placing the glue stick into the hot melt glue gun also needs attention. First, you need to determine the size and shape of the glue stick and place it into the gun's feeding inlet. Then, you need to turn on the power to the hot glue gun and adjust the temperature setting to the appropriate value. The usual temperature setting should be indicated on the hot glue gun. Once your hot glue gun is hot, the glue stick will begin to melt and then flow out through the nozzle.

Fifth, apply hot melt glue

Once you have your hot glue gun and glue stick ready, you can start applying hot glue. When applying hot melt adhesive, you need to pay attention to the following points:

1. Do not use hot glue on hands or bodies that you cannot touch.

2. When applying hot melt glue, do not soak it on surfaces and materials that it should not stick to.

3. When using hot melt adhesive, avoid overuse or too little use.

Sixth, the use of hot melt adhesive fixed materials

When you need to use hot melt adhesive for fixing, you need to bring the two materials you need to bond close together and glue the hot melt adhesive.

Seventh, the treatment of hot melt glue

After completing your set tasks, you need to pay attention to the following:

1. Wait for the hot melt glue to cool and do not touch the glue with your hands to avoid fire or burn.

2. The hot melt adhesive is attached to the ground or body skin that should not be attached. Do not use metal tools to avoid damage.

3. If the hot glue is stuck in the hot glue gun, you need to clean it up.

In general, the correct use of hot glue requires attention to every detail, from choosing the right type of hot glue gun, glue and glue stick to preparing tools, working areas and handling materials after fixing them. Only in this way can you make your use process safer and smoother.